New Anycubic resin colors arriving this week!

AnyCubic UV Sensitive Resin


12



Sale price $42.00 Regular price

$50.00

  • Specifically designed for LED light source to achieve better printing quality.
  • Rapid prototyping. The resin has been developed to reduce the forming time.
  • Strong adhesion. The adhesion has been improved for higher print success rate.
  • Appropriate toughness. Anycubic UV resins have good combination of hardness and toughness, which brings easy removal of the model and fine printing details.
  • Great stability. After cured, AnyCubicUV resins show good stability in moist and corrosive environment

 

Parameter information:
Size: ~500g/500ml
Color: Black,White,Grey,Yellow,Green
Main materiaal: resin monomer , photoinitiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
Warranty: 12 months

Resin parameters:
Solidify wavelength: 405nm
Hardness (D): 79.0
Viscosity (25C): 552.0 mpa.s
Liquid density: 1.100 g / cm3
Solid density: 1.184 g / cm3
Flexural strength: 23.4 Mpa
Tensile strength: 23.4 Mpa
Elongation frequency: 14.2 %


Precautions:
1. Storage
1) Keep away from light and sealed at room temperature. (Sunshine contains a certain amount of UV light which would solidify photosensitive resin. Inside the machine, the Anycubic resins would not be affected for over 48 hours if it is not UV light)
2) It is recommended to store the resin under 15C -35C in a sealed container.
Avoid any dusty or moist environment.

2.Usage:
1) Shake well before use. Avoid any direct sunlight during usage.
2) Do not put in mouth. Keep away from children.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) For accidental contact, please wash with plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.
6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues.

3. DLP printer how to choose corresponding UV resin.
Before choosing Anycubic resins for your own 3D printer, please confirm that the UV wavelength of your 3D printer is 405nm. We are not responsible for any damages incurred.


Customer Reviews

Based on 12 reviews
5 Star
100% 
12
4 Star
0% 
0
3 Star
0% 
0
2 Star
0% 
0
1 Star
0% 
0
Write a Review
  • Reviews (12)

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

OK
07/20/2018
Orin K.
United States

Happy Customer

Shipping time was superb! No delay and arrived quickly! Product was well packaged and you just cannot beat the prices here!

RM
07/08/2018
Robert M.
United States

great as always!

item is great! works perfectly!

KW
07/06/2018
Kyle W.
United States

Great service, great price!

The product arrived in perfect condition within days of ordering, and is much cheaper than the exact product from other sources. Will definitely purchase again!

KA
07/06/2018
Karen A.
United States

Fast service and shipping.

Legit product for great price. Service and shipping is on par with amazon.

LS
07/04/2018
Lou S.
United States

Order of AnyCubic Resin - Awesome Experience

I can't say enough about how easy it was to order, the super speed of fulfilling the order, and the great packaging! A+ service all around! Although, shipping was a bit costly, it still came in under what I would have spent on Amazon with free prime shipping! Thanks guys!